The Parajet 11170 Parajet Maverick Harness Arm Attachment Kit includes: 2 - PJ-P-10011 Cap head bolt M6 x 30mm, 2 - PJ-M-10156 Pin Hinge, 4 - PJ-M-10219 Nylon Bushing, and 2 - PJ-P-10096 Button Clips.
Carefully tighten the attachment bolt in a clockwise direction to 19.8Nm. Use Green Loctite 638.
**If your Maverick was manufactured prior to 2020** it is possible you may require cutting of the shoulder length on the aluminum “trumpet” to achieve the correct fitment between the bushings, the swingarm and the titanium swingarm “boss”. It is best to have access to a lathe to perform this cutting procedure.**
