*Full Kit* ST-201 PPG Strobe | SkyFlar

SkyFlar PPG Strobe, Full Kit ST-201

Includes all to install and operate: 1 ST-201 Strobe Kit, 1 LI-18650 Battery Pack Kit, 3 18650 Batteries. Everything to install and start using the SkyFlar Strobe!

BASIC DATA:

• Supply voltage: 10V – 30V DC.
• Power: 50 W flash.
• Luminous flux 6000 lumens.
• Color temperature 5500-6000 K.
• Does not interfere with radio waves.
• Integrated temperature sensor.
• Resilient to shocks, impacts, water.
• Led Lamp : Diameter 34 mm, weight: 70g.
• Led controller : 145mmx25mm (5.70 x 0.98 inch.), weight 120g.
• Range of about 10 km in the dark !!!

6 WORKING FUNCTIONS:

• Single flashes with a frequency of 43,50,55 flashes per minute.
• Single flashes with a frequency of 43,50,55 flashes per minute + steady light (position lamp).
• Double flashes with a frequency of 43 cycles per minute.
• Triple flashes with a frequency of 43 cycles per minute.
• 360 degrees flashlight (additional lighting of the start and landing, and assembling or disassembling of the equipment).
• SOS light signal activated by an integrated overload sensor or manually.

ADDITIONALLY

• Option of automatic activation after connecting the power supply (possibility of putting the controller in a hard-to-reach place).
• Possibility of assembling the switch out of the controller (a ST-201 switch extension kit is available).
• lluminated LED button on the switch that signalizes working functions and messages (such as low battery, not connected lamp etc.).
• Possibility of modifying the settings and disabling some working functions by connecting to a computer.