Permatex Red Gel Twist High Strength - Thread Locker

OEM specified. Gel formula provides "liquid-reliability" without drips, globs, mess or waste. Available in three convenient sizes, the GEL TWIST pin-point applicator, the GEL SQUEEZE applicator, or the single-use pouch puts the Threadlocker right where you want it...on the part! High strength threadlocker for heavy-duty applications 3/8" to 1" (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal. Conforms to ASTM D5363 AN0221 (Mil-S-46163A, Type I, Grade K).

Product Features:

High strength threadlocker for heavy-duty applications 3/8" to 1" (10mm to 25mm)
Especially well-suited for permanently locking studs and press fits
Adds 3,000 PSI holding power on slip and press fit assemblies
May require heat or special tools for removal
Gel formula provides "liquid reliability" without drips, globs, mess or waste
Great for overhead and vertical applications

Instructions:

-Clean all threads (bolt and hole) with a cleaning solvent 2. Shake the product thoroughly before use.

-Assemble and tighten as usual. When tightening to established torque values, torque compensation is not required.

Thread Lock Gel - High Strength | SkySportsUSA