1 pair of Light Universal Apco Reserve Bridals.
Apco Light Universal Bridle made from this new material, will be offered alongside our existing Universal Bridle. The smart design of the Universal Bridles allows for connecting the reserve parachute to the harness without any metal links, further reducing weight and improving safety and strength.
The webbing is constructed from Dyneema fibers, only 12mm. wide, rated for over 1,700 [DaN]. The new bridles are stronger than before, allow for smaller weight and packing volume, and due to the material's mechanical properties, reduce opening shock by offering higher elasticity.
ASSEMBLY INSTRUCTIONS
Step 1 Expose shoulder bridle loop connection ![]() |
Step 2 Thread the bridle through the loop ![]() |
Step 3 Loop the bridle through itself ![]() |
Step 4 Tighten the bridle ![]() |
Step 5 Bridles connected to the shoulder loops ![]() |
Step 6 Prepare the Mayday to be connected ![]() |
Step 7 Heat shrink recommended, but not obligatory ![]() |
Step 8 Thread the bridle through the loop of Mayday bridle ![]() |
Step 9 Push the Mayday through the wider bridle loop ![]() |
Step 10 Push the Mayday through the wider bridle loop ![]() |
Step 11 Mayday and bridle looped ![]() |
Step 12 ![]() |
Step 13 ![]() |
Step 14 Mayday bridle and Universal bridle connected ![]() |
Step 15 Tighten each bridle separately. Make sure there is no slack left on each bridle loop ![]() |
Step 16 Heat shrink the connection to fix the loop ![]() |
Step 17 Final configuration ![]() |