Vittorazi Handy Box Factory R.
The new Moster 185 Factory R Handy Box is suitable for all versions of the Moster 185 Factory R. It's a small supply of spare parts to use for ordinary or extraordinary maintenance of the engine, thanks to a ready-to-use kit that allows you to intervene for the small necessities. All parts can be used for the programmed 100-hour revision.
We recommend that you always ask for advice from your dealer for the use of each individual part of the box
WARNING: The components highlighted in red absolutely must be used by professionals with specific skills. If not used by professional, there is a risk of serious damage to the engine, and also to personal safety. If used without the supervision of a professional the guarantee on the engine is not valid.
Here you can find the complete list of all the components in the kit:
ANTIVIBRATION GROUP
MFR021a- Antivibration mounts 40 x 45 mm – M8 x 15 mm - 2 pcs
MFR021b - Antivibration mounts 40 x 45 mm – M8 x 25 mm - 2 pcs
IGNITION GROUP
ACC090 Iridoum EIX Spark Plug - 1pc
M031a Spark-Plug Cap (Selettra) - 1 pc
MANUAL STARTER GROUP
MP055 - Plastic Hooks - 2 pcs
MP057 - Elastic rings for hooks - 1 pc
M043 - Starter rope 2,20 meters - 1pc
EXHAUST GROUP
My202 - Kit bronze bushing with springs and safety cables - 1 pc
M151a - Antivibration mount 30 x 20 mm soft (left) 14/20 mm - 1pc
M151c - Antivibration mounts 30 x 20 mm hard (right) 14/14 mm - 2 pcs
ASPIRATION GROUP
MP093b - Snaplock male and female - 1 pc
ACC005 - Porex filter 6 X 10 mm - 1 pc
AC011 - Fuel line pipe silicon int. 4,8 mm - ext. 8,0 mm - 1 mt
GASKETS
M097 - Series membranes and gaskets Walbro - 1pc
MFR025 - Complete series of gaskets and O-ring - 1 pc
VARIOUS
M018 - Washers Ø 8 x 16 mm DIN 125A - 4 pcs
M019 - Copper lock nuts height temperature 8 x 1,25 mm - 10 pcs
M138a - Washers grower Ø 8 mm DIN 127B (Set of 2) - 2 pcs
MFR107a - Drum/Pinion cap - 1 pc
