80030 Universal Dyneema Safety Loop for Low and Mid Swing Arms (Set of 2)
Designed for use on Apco SLT MKII Harnesses and to be coupled with the Figure 8 connection (Code: 80049) or with Carabiner Loop (Code: 44704)
Can be used in place of 80041 and 80042.
Universal and can be used for Low and Mid swing arm type paramotors (PAP, PXP, Kangook, Flyproducts. etc.)
The Safety straps back up the pilot in case of failure of the side arm.
Contrary to other solutions on the market, they are connected to the seatboard at the Center of Gravity, to retain the same balanced sitting position in case of side arm failure.
Notes to ensure you have the correct setup:
Always do a hang check prior to flight.
If your Safety webbing is too long:
- In case of asymmetric arm failure, there will be a large difference in carabiner heights between the 2 sides, leading to a dangerous weight shift turn.
